Pengembangan Job Sheet Praktik Plambing di Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Jakarta sesuai dengan Standar Kompetensi Kerja Nasional Indonesia (SKKNI)

Authors

  • MOCHAMAD AGUNG PRASETYO SUKANTO Universitas Negeri Jakarta
  • R. EKA MURTINUGRAHA Universitas Negeri Jakarta
  • RIYAN ARTHUR Universitas Negeri Jakarta

DOI:

https://doi.org/10.47028/j.risenologi.2021.61b.248

Keywords:

Pengembangan, Job sheet, Plambing, SKKNI

Abstract

This study aims to develop a performance assessment instrument in the form of a plumbing practice job sheet in the S1 Building Construction Education Study Program in accordance with the Indonesian National Work Competency Standards (SKKNI). This study uses the Research and Development (R&D) method with the model used, namely the 4D development model (Define, Design, Development, Disseminate). This research was conducted with a product feasibility validation test involving experts in 2 aspects, namely the material aspect and the evaluation aspect. The results of the percentage of product feasibility validation on the material aspect of 86.42% can be categorized as very feasible, while the results of product feasibility validation on the evaluation aspect get a percentage of 91,67% can be categorized as very feasible. So that the job sheet can be used in plumbing practice learning activities in the workshop to improve work competencies covering aspects of knowledge, skills and work attitudes.

References

Aiken, L. R. (1985). Three Coefficients for Analyzing the Reliability and Validity of Ratings. Educational and Psychological Measurement, 45(1), 131–142. https://doi.org/10.1177/0013164485451012

Arends, R. I. (2012). Learning to Teach (9th Ed.). Mc Graw-Hill.

Ataç, B. A. (2012). Foreign Language Teachers’ Attitude toward Authentic Assessment in Language Teaching. The Journal of Language and Linguistic Studies, 8(2), 7–19.

Brookhart, S. M., & Nitko, A. J. (2011). Educational Assessment of Student (6th ed.). Pearson Education, Inc.

Devi, P. L., Wijaya, M. B. R., & Suwahyo. (2017). Pengembangan Perangkat Pembelajaran Job Sheet Berbasis Performance Assessment Untuk Meningkatkan Kompetensi Conventional Engine Tune Up. Sainteknol, 15(1), 95–100. https://doi.org/10.15294/sainteknol.v15i1.9405

Gall, M. D., Borg, W. R., & Gall, J. P. (2003). Educational Research: An Introduction (7th edition). Pearson Education, Inc. https://doi.org/10.2307/3121583

Hendryadi. (2017). Validitas Isi: Tahap Awal Pengembangan Kuesioner. Jurnal Riset Manajemen Dan Bisnis (JRMB) Fakultas Ekonomi UNIAT, 2(2), 169–178. https://doi.org/10.36226/jrmb.v2i2.47

Ihsan, H. (2015). Validitas Isi Alat Uukur Penelitian: Konsep Dan Panduan Penilaiannya. PEDAGOGIA: Jurnal Ilmu Pendidikan, 13(3), 266–273. https://doi.org/10.17509/pedagogia.v13i3.6004

Lumempow, O. E., Dundu, A. K. T., & Arsjad, T. T. (2018). Study Penerapan Standar Kompetensi Kerja Nasional Indonesia (SKKNI) Bidang K3 (Studi Kasus: Pembangunan Gedung Laboratorium Fakultas Teknik Unsrat). Jurnal Sipil Statik, 6(12), 1085–1094. https://ejournal.unsrat.ac.id/index.php/jss/article/view/20875

Maulana, I., Arthur, R., & Daryati. (2019). Kualitas Tes Kompetensi Tukang Aci dan Plesteran Berdasarkan KKNI. Jurnal Pendidikan Teknologi Dan Kejuruan, 16(2), 149–158. https://doi.org/10.23887/jptk-undiksha.v16i2.17141

Mulyawan, D., & Dani, H. (2018). Analisis Tingkat Pemenuhan Fasilitas Bengkel Kerja Kompetensi Keahlian Teknik Bangunan SMK Negeri 1 Sidoarjo. Jurnal Kajian Pendidikan Teknik Bangunan, 1(1), 102–109.

Nugrahani, R., Prasetyo, A. P. B., & Iswari, R. S. (2018). Authentic Assessment of Fungi for Vocational School Student: Concept Map, Self Assessment and Performance Test. Journal of Innovative Science Education, 7(1), 10–24. https://doi.org/10.15294/jise.v7i1.21730

Permana, K. V., Saleh, R., & Rochadi, D. (2019). Pengembangan Bahan Ajar Desain Interior Berbantuan Aplikasi Multimedia Sketch Up Pada Prodi PTB FT UNJ. Jurnal Pendidikan Teknik Sipil (JPenSil), 8(2), 81–88. https://doi.org/10.21009/jpensil.v8i2.11955

Putri, F. A., Suroto, & Wahyuni, I. (2017). Hubungan Antara Pengetahuan, Praktik Penerapan SOP, Praktik Penggunaan APD dan Komitmen Pekerja dengan Risiko Kecelakaan Kerja di PT X Tangerang. Jurnal Kesehatan Masyarakat (e-Journal), 5(3), 269–277.

Ramadhan, M. A., Febriyani, F., & Iriani, T. (2020). Faktor Kecelakaan Kerja Dominan Yang Terjadi Pada Praktik Plumbing (Studi Kasus Di Prodi Pendidikan Teknik Bangunan UNJ). Applied Science In Civil Engineering, 1(3), 138–144. http://asce.ppj.unp.ac.id/index.php/ASCE/article/view/33

Romana, R. A. (2020). Pengembangan Jobsheet Pratik Batu Beton Sesuai Standar Kerja Nasional Indonesia di Program Studi Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Jakarta. Pendidikan Teknik Sipil, 9(2), 91–96. http://journal.unj.ac.id/unj/index.php/jpensil/article/view/13126/8658

Siregar, R. F., & Tambunan, B. H. (2017). Hubungan Pengalaman Praktik Kerja Lapangan Indutri (PKLI) dengan Kesiapan Kerja Siswa sesuai Standar Kompetensi Kerja Nasional Indonesia (SKKNI) Kelas XII Paket Keahlian Teknik Kendaraan Ringan SMK Negeri 2 Medan T.A 2016/2017. Jurnal Pendidikan Teknologi Dan Kejuruan, 19(1), 32–38. https://doi.org/doi.org/10.24114/jptk.v19i1.7153

SKKNI. (2015). SKKNI Nomor 083 Tahun 2015 tentang Jabatan Kerja Pelaksana Teknik Plambing. Kementerian Ketenagakerjaan.

SKKNI. (2016). SKKNI Nomor 304 Tahun 2016 tentang Jabatan Kerja Tukang Plambing. Kementerian Ketenagakerjaan.

Sugiyono. (2015). Metode Penelitian dan Pengembangan?: Research and Development. Alfabeta.

Sujana, I. W. C. (2019). Fungsi dan Tujuan Pendidikan Indonesia. Adi Widya, 4(1), 29–39. https://doi.org/10.25078/aw.v4i1.927

Thiagarajan, S., Semmel, D. S., & Semmel, M. I. (1974). Instructional Development for Training Teachers of Exceptional Children: A Sourcebook. Leadership Training Institute, University of Minnesota. https://doi.org/10.1016/0022-4405(76)90066-2

Downloads

Published

2021-10-25

How to Cite

AGUNG PRASETYO SUKANTO, M. ., MURTINUGRAHA, R. E., & ARTHUR, R. (2021). Pengembangan Job Sheet Praktik Plambing di Pendidikan Teknik Bangunan Fakultas Teknik Universitas Negeri Jakarta sesuai dengan Standar Kompetensi Kerja Nasional Indonesia (SKKNI). Risenologi, 6(1b), 63–69. https://doi.org/10.47028/j.risenologi.2021.61b.248